Publications
-
Beating the Thermal Conductivity Alloy Limit Using Long-Period Compositionally Graded Si1- xGe xSuperlattices
Ferrando-Villalba P., Chen S., Lopeandía A.F., Alvarez F.X., Alonso M.I., Garriga M., Santiso J., Garcia G., Goñi A.R., Donadio D., Rodríguez-Viejo J. Journal of Physical Chemistry C; 124 (36): 19864 - 19872. 2020. 10.1021/acs.jpcc.0c06410. IF: 4.189
Superlattices with scattering mechanisms at multiple length scales efficiently scatter phonons at all relevant wavelengths and provide a convenient route to reduce thermal transport. Here, we show, both experimentally and by atomistic simulations, that SiGe superlattices with well-established compositional gradients and a sufficient number of interfaces exhibit extremely low thermal conductivity. Our results reveal that the thermal conductivity of long-period (30-50 nm) superlattices with thicknesses below 200 nm is still thickness-dependent and higher than that of the corresponding alloy thin film. Increasing the number of periods up to 16 has a strong impact on heat propagation, leading to thermal conductivity values below the thin-film alloy limit. Lattice dynamics calculations confirm that the reduced thermal conductivity stems from the simultaneous effects of mass scattering, graded interface scattering, and coherent interference from the lattice periodicity. This study provides a significant step forward in understanding the role of compositional gradients in heat transport across nanostructures. The strategy of employing long-period graded superlattices with extremely low thermal conductivities has great potential for micro- and nano-thermoelectric generation and cooling of Si-based devices. Copyright © 2020 American Chemical Society.
-
Control of lateral composition distribution in graded films of soluble solid systems A1-xBx by partitioned dual-beam pulsed laser deposition
Sakai J., Roque J.M.C., Vales-Castro P., Padilla-Pantoja J., Sauthier G., Catalan G., Santiso J. Coatings; 10 (6, 540) 2020. 10.3390/COATINGS10060540. IF: 2.436
Lateral compositionally-graded thin films are powerful media for the observation of phase boundaries aswell as for high-throughputmaterials exploration.We herein propose amethod to prepare epitaxial lateral compositionally-graded films using a dual-beampulsed laser deposition (PLD)method with two targets separated by a partition. Tuning the ambient pressure and the partition-substrate gap makes it possible to control of the gradient length of the deposits at the small sizes (≤ 10 mm) suitable for commercial oxide single crystal substrates. A simple Monte Carlo simulation qualitatively reproduced the characteristic features of the lateral thickness distribution. To demonstrate this method, we prepared (1-x)PbTiO3-xPbZrO3 and (1-x)LaMnO3-xLa0.6Sr0.4MnO3 films with lateral composition gradient widths of 10 and 1 mm, respectively, with the partitioned dual PLD. © 2020 by the authors.
-
Large thermoelectric power variations in epitaxial thin films of layered perovskite GdBaCo2O5.5±δwith a different preferred orientation and strain
Chatterjee A., Chavez-Angel E., Ballesteros B., Caicedo J.M., Padilla-Pantoja J., Leborán V., Sotomayor Torres C.M., Rivadulla F., Santiso J. Journal of Materials Chemistry A; 8 (38): 19975 - 19983. 2020. 10.1039/d0ta04781c. IF: 11.301
This work describes the growth of thin epitaxial films of the layered perovskite material GdBaCo2O5.5±δ(GBCO) on different single crystal substrates SrTiO3(STO), (LaAlO3)0.3(Sr2TaAlO6)0.7(LSAT) and LaAlO3(LAO) as an approach to study changes in the thermoelectric properties by means of the induced epitaxial strain. In addition to strain changes, the films grow with considerably different preferred orientations and domain microstructures: GBCO films on STO are purelyc-axis oriented (c⊥) with an average 0.18% in-plane tensile strain; GBCO on LSAT is composed of domains with a mixed orientation (c‖andc⊥) with an average 0.71% in-plane compressive strain; while on LAO it isb-axis oriented (c‖) with an average 0.89% in-plane compressive strain. These differences result in important cell volume changes, as well as in the orthorhombicity of thea-bplane of the GBCO structure, which in turn induce a change in the sign and temperature dependence of the thermopower, while the electrical conductivity remains almost unchanged. In general, compressively strained films show negativeSthermopower (n-type) while tensile strained films show a positiveS(p-type) at low temperatures, probing the adaptive nature of the GdBaCo2O5.5±δcompound. These results point to the spontaneous generation of oxygen vacancies to partially accommodate the epitaxial stress as the main cause for this effect. © The Royal Society of Chemistry 2020.
-
Revealing Strain Effects on the Chemical Composition of Perovskite Oxide Thin Films Surface, Bulk, and Interfaces
van den Bosch C.A.M., Cavallaro A., Moreno R., Cibin G., Kerherve G., Caicedo J.M., Lippert T.K., Doebeli M., Santiso J., Skinner S.J., Aguadero A. Advanced Materials Interfaces; 7 (2, 1901440) 2020. 10.1002/admi.201901440. IF: 4.948
Understanding the effects of lattice strain on oxygen surface and diffusion kinetics in oxides is a controversial subject that is critical for developing efficient energy storage and conversion materials. In this work, high-quality epitaxial thin films of the model perovskite La0.5Sr0.5Mn0.5Co0.5O3− δ (LSMC), under compressive or tensile strain, are characterized with a combination of in situ and ex situ bulk and surface-sensitive techniques. The results demonstrate a nonlinear correlation of mechanical and chemical properties as a function of the operation conditions. It is observed that the effect of strain on reducibility is dependent on the “effective strain” induced on the chemical bonds. In-plain strain, and in particular the relative BO length bond, is the key factor controlling which of the B-site cation can be reduced preferentially. Furthermore, the need to use a set of complimentary techniques to isolate different chemically induced strain effects is proven. With this, it is confirmed that tensile strain favors the stabilization of a more reduced lattice, accompanied by greater segregation of strontium secondary phases and a decrease of oxygen exchange kinetics on LSMC thin films. © 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
-
Self-Pixelation Through Fracture in VO2 Thin Films
Laura Rodríguez, Elena del Corro, Michele Conroy, Kalani Moore, Felip Sandiumenge, Neus Domingo, José Santiso, Gustau Catalan Acs Applied Electronic Materials; 2 (5): 1433 - 1439. 2020. 10.1021/acsaelm.0c00199. IF: 0.000
-
The formation of oriented barium carbonate from the decomposition of yttria-doped barium zirconate films
Jennings D., Ricote S., Santiso J., Reimanis I. Scripta Materialia; 186: 401 - 405. 2020. 10.1016/j.scriptamat.2020.05.028. IF: 5.079
Yttria doped barium zirconate (BZY) thin films show promise thanks to their high proton conductivities and their possibility for use in studying fundamental processes such as exsolution. This work demonstrates that highly oriented BZY thin (45 nm) films on (100) single crystal strontium titanate decompose into oriented barium carbonate rods and yttria stabilized zirconia when exposed to industrial grade Ar or pure CO2 at 800 °C. It is shown with transmission electron microscopy that the rods nucleate on the BZY surface. The causes and modes of decomposition in these thin films are discussed in detail. © 2020 Acta Materialia Inc.
