Logo image
ICN2’s electron microscopy studies help develop a more stable catalyst for sustainable fuel production
Thursday, 19 November 2026
Chema Arcos

In their study, published in Nature Materials, the researchers tested a combination of ruthenium and chromium to reduce degradation in a key catalyst used in water electrolysis. This strategy could help advance the development of more efficient and durable green hydrogen production technologies.

Electron microscopy for a more stable catalyst for sustainable fuel production

Water electrolysis, the process of splitting water into hydrogen and oxygen, can be powered by renewable energy sources. This is one way of producing fuels such as hydrogen more sustainably. However, the technology still faces significant challenges. For instance, some materials that accelerate the necessary reactions become less effective over time. This is the case with ruthenium-based catalysts, as this metal can degrade in the acidic conditions in which electrolysers operate.

A study published in Nature Materials led by ICFO’s Prof. F. Pelayo Garcia de Arquer and involving researchers from the ICN2’s Advanced Electron Nanoscopy Group (headed by ICREA Prof. Jordi Arbiol) and the Electron Microscopy Unit, as well as researchers from IREC, has now explored a strategy to improve catalyst stability by designing interactions between atoms at the nanoscale.

The approach investigated in the study involved placing pairs of ruthenium and chromium atoms close to one another, connected through an oxygen atom (Ru-O-Cr). These pairs were anchored onto a manganese oxide support. The main finding was that, in this chemical structure, the chromium acts as an electronic buffer, protecting the ruthenium from excessive oxidation. Spectroscopic measurements taken during the reaction showed that this helped to maintain a more stable chemical environment around the ruthenium atoms, thereby increasing their resistance to degradation.

Other tests carried out during the study showed that the new electrocatalyst had a degradation rate 6.8 times lower than a single-atom ruthenium catalyst and 14.4 times lower than commercial ruthenium oxide at a current density of 1 A/cm². It also maintained its performance for 285 hours under the tested conditions.

Further work will be needed to validate the design on larger-area electrodes and over longer periods. Nevertheless, this study suggests a promising approach to developing more stable catalysts by controlling the interactions between their atoms.

Reference article:

Chen, T., Wang, K., Xia, L., Jiang, W., Ferreira Gomes, B., Yang, L., Zhao, K., Huang, H., Lobo, C. M. S., Ram, R., Chen, J., He, R., Garzón Manjón, A., Gupta, K., Zhu, Z., Dimitropoulos, M., Golovanova, V., Gimenes Vernasqui, L., Hörnig, S., Haldar, P., Polesso, B., Das, A. M., Kadam, S., Cabot, A., Arbiol, J., & García de Arquer, F. P. Proximal redox coupling enables oxidation damping for stable water electrolysis. Nature Materials. (2026). https://doi.org/10.1038/s41563-026-02783-4